|
|
User Rank: Newbie
Joined: 9/28/2009
Posts: 2
|
What's up with this thing? I burned a cd with no problems. I flipped it to print it and it would not print. I tried another cd. Same problem. I tried again with the first. Didn't work.
I insert the cd and pull up nero cover designer. I tell it to print the label, and the process supposedly begins. When it tells me that it failed, the drive will no longer eject. So, I manually eject the drive, take out the cd, and shut down the computer using the power button. No, the turn off computer dialogue does not do it. And I can't restart either. I have to shut it down, wait, and then reboot. Can someone help? I want lightscribe back....it worked less than a week ago.
|
|
User Rank: Power User
Joined: 8/3/2008
Posts: 1570
|
Hi Philip  !
I had the same problem with the first 2 spindles of Memorex and cleaning the LS Marks in the Hub.
Even now, I sometimes have to retry a few times to get these Marks to be recognized.
These Marks are used for Media Detection Positioning, and Timing.
This is the touchiest part of the technology.
|
|
User Rank: Newbie
Joined: 9/28/2009
Posts: 2
|
Ok. Thanks. It worked this time.
|
|
User Rank: Newbie
Joined: 10/21/2008
Posts: 3
|
I cannot seem to burn Lightscribe disks with any regularity.
Sometimes I get a couple to burn, then nothing. I try rebooting. Sometimes it works, sometimes it doesm't.
The most common error is:
Lightscribe Error
The disc in the Lightscribe drive is not recognized.
Amy suggestons?
|
|
|
|